SLIP-RITE SF-200 Slipform Concrete Enhancer 20 litre Bottle
SLIP-RITE SF-200 is a is a proprietary concrete additive, specifically engineered for low-slump/high-strength compactable/slip form concrete mixes and Cement Treated Bases, and Roller Compacted Concrete. It is a blended liquid additive that is odorless, tasteless and bio-degradable.
SLIP-RITE can be used to reduce the total cement content and used in combination with supplementary cementitious materials (SCMs). It does not contain added chlorides or chemicals known to promote the corrosion of steel. It is comprised of a unique blend of concentrated uniquely processed chemistry which in some circumstances may be capable of:
- Decreasing the quantity of mixing water (water/cement ratio)
- Enhancing workability of harsh concrete mixtures
- Increasing material transport time thereby increasing logistical plant service area
- Decreasing compacted effort to achieve density
- Increasing cohesiveness of wear surface
- Reducing in tear and sag during slip form process
- Predictably managing initial and final set times of concrete mixes
The combination of these attributes provides the user with: a more workable mix, easier to place, slip, and finish-low slump concrete mixes and allow for a finished and tooled surface that is unsurpassed by conventional mixes. The Dosage rate will affect slump, compressive strength, workability, and water to cement ratio.
SLIP-RITE SF-200 Benefits:
- Can be used in conjunction with other concrete chemical admixtures, i.e., air entraining, set retarders, set accelerators shrinkage reducers, corrosion inhibitors, and microsilica; however, each material should be added to the concrete separately.
- Increased cement paste workability and consolidation. The use of SLIP-RITE SF-200 allows the user to achieve total mix workability, and increased density.
- Mixes with SLIP-RITE SF-200 may be less affected by heat and wind conditions than traditional low slump mixes.
- Lower water demand to achieve similar density and strengths.
- Maintains mix design properties from the mixing source. Retains the component characteristics of air.
Directions for Use
SLIP-RITE SF-200 can be added to the initial batch water or directly on the freshly batched concrete and mixed for approximately 5 minutes or 70 revolutions. It should not come into contact with dry cement or other admixtures until mixed thoroughly with the concrete batch. SLIP-RITE SF-200 is dispensed with automatic equipment, thus insuring uniformity of admixture use throughout the project.
Dosage Rates:
Typical dosage rates for SLIP-RITE SF-200: 3-8ml per kilogram of Cement. But the unique properties of this admixture should be customized for each material and mix that it is implemented in.Storage and Precautions
➢ Care should be taken to maintain SLIP-RITE SF-200 above freezing; however, freezing and subsequent thawing will not harm the material if thoroughly agitated.
➢ Do not agitate with air.
➢ Add to concrete mix independent of other admixtures.
➢ All measures should be taken to ensure that packaging is not damaged prior to immediate use of the material and that it does not become contaminated with other materials. Should separation
occur over extended period of time, recirculating material is suggested.
➢ In all cases, consult the Material Safety Data Sheet before use.Additional Information
For additional information contact sales@rhinostrong.co
ACEiT SF-100 a product developed and manufactured by ACEiT, marketed and sold in Australia as a Rhino Brand, product name SLIP-RITE SF-200. Sold and Distributed by Aran Plant Pty Ltd.